SCOPE OF DELIVERY/ COMPONENTS:
- Coil carrier with separate crop shear
- single sided de-coiler,
- max coil width 2000mm, max weight 30tons
- Two exchangeable straightening units ( cassette type ) with 13 straightening rolls,
max blank thickness 1.8mm, max. blank width 2000mm
- Loop pit
- Roll feeder with roll diameter 220 mm, feed length max 4000mm
- Monitoring of oil film thickness via scanner
- Mechanical Blanking Press MUELLER WEINGARTEN VK 800.28.35 ( 1983)
* with max. 55 strokes per minute
* Table dimensions (clamping surface 2800 x 2800 mm
* 2 Changing tables
and 350mm stroke travel
- FIRST NSM Blank de-stacker unit with 2 unloading stations
- Max. blank dimensions 4000 x 2000mm
- Conveyance speed 30 - 150 meters per minute
- Packet weight max. 12000 kgs
- Packet height max. 650 mm.
(On this part finishing for side panel cutouts via controlled dies)
- SECOND NSM unloading and stacking unit (90° towards flow through) - for smaller blanks and form blanks.
- max. size 1650 x 800 mm
- max. heigth with pallet = 450 mm.
240 to 270 tons cut blanks per day in a 3 shift operation
Description of condition
Blanking system for OUTER SKIN PANELS, with straightening machine cassettes to change. This system is "COIL CUT" capable.
Video at: https://
The complete conveyor system was revised in 2011:
- SEW and Siemens components electronically synchronized: NEW
- Cardan shafts of the straightening system: NEW
- Hinge side guide: Optimized
- Complete electrics and electronics (S7): NEW
- Drive block of the press:
• BEFORE: grease lubrication
• NOW: Circulating oil lubrication
NSM destacking system with two stations each up to 4000 mm in length and a side NSM destacking system with max.blank dimensions of 1650 x 800 mm.
= COIL CUT CAPABLE SYSTEM !! - 1 HUB = max. 4 PARTS through nesting and removal in longitudinal and transverse directions.