Goedicke Werkzeug-
maschinenhandels GmbH

Heinz-Nixdorf-Str. 2
D-74172 Neckarsulm

+49-(0)7132–999 360



Blanking Line (for blank preparation)

Stock No. 7-40263
Last revision 2011

Press Design

frame design H-frame 
openings in uprights yes 
opening in table yes 
moving bolster yes 

Press Table

clamping surface (left-right) 2800 mm
clamping surface (front-back) 2800 mm
height above floor level 375 mm


ram force 800 to
clamping surface (left-right) 2800 mm
clamping surface (front-back) 2800 mm
stroke 350 mm
number of strokes max 55 /min

ram (mechan. press)

ram adjustment 350 mm

Tool Assembly Dimensions

shut height (stroke down, adjustment up) 1100 mm
distance between columns (H-frame) 3100 mm
Free passage between side columns (width) 2560 mm
Free passage between side columns (height) 1500 mm


design single coil 
sheet width max 2000 mm
sheet width (min) 400 mm
max. weight of coil 30 to
max. diameter of coil 2000 mm
min. internal diameter of coil 610 mm

leveler unit

sheet width max 2000 mm
sheet width (min) 400 mm
sheet thickness max 1.8 mm
sheet thickness (min) 0.6 mm
number of leveler rolls 13 
diameter of leveler rolls 50 mm


feeder: type roll feeder 
sheet width max 2000 mm
sheet thickness max 2 mm
feeding step max. 4000 mm

Electrical specifications

mains power supply 400 kVA

Technical description

SCOPE OF DELIVERY/ COMPONENTS: - Coil carrier with separate crop shear - single sided de-coiler, - max coil width 2000mm, max weight 30tons - Two exchangeable straightening units ( cassette type ) with 13 straightening rolls, max blank thickness 1.8mm, max. blank width 2000mm - Loop pit - Roll feeder with roll diameter 220 mm, feed length max 4000mm - Monitoring of oil film thickness via scanner - Mechanical Blanking Press MUELLER WEINGARTEN VK 800.28.35 ( 1983) * with max. 55 strokes per minute * Table dimensions (clamping surface 2800 x 2800 mm * 2 Changing tables and 350mm stroke travel - FIRST NSM Blank de-stacker unit with 2 unloading stations - Max. blank dimensions 4000 x 2000mm - Conveyance speed 30 - 150 meters per minute - Packet weight max. 12000 kgs - Packet height max. 650 mm. (On this part finishing for side panel cutouts via controlled dies) - SECOND NSM unloading and stacking unit (90° towards flow through) - for smaller blanks and form blanks. - max. size 1650 x 800 mm - max. heigth with pallet = 450 mm. PERFORMANCE: 240 to 270 tons cut blanks per day in a 3 shift operation

Description of condition

Blanking system for OUTER SKIN PANELS, with straightening machine cassettes to change. This system is "COIL CUT" capable. Video at: https:// The complete conveyor system was revised in 2011: - SEW and Siemens components electronically synchronized: NEW - Cardan shafts of the straightening system: NEW - Hinge side guide: Optimized - Complete electrics and electronics (S7): NEW - Drive block of the press: • BEFORE: grease lubrication • NOW: Circulating oil lubrication Also: NSM destacking system with two stations each up to 4000 mm in length and a side NSM destacking system with max.blank dimensions of 1650 x 800 mm. = COIL CUT CAPABLE SYSTEM !! - 1 HUB = max. 4 PARTS through nesting and removal in longitudinal and transverse directions.