Planer Type Milling Machine - Universal
- Stock number
- 7-39559
- Make
- WALDRICH SIEGEN
- Model
- POWERTEC 4000 AP
- Control
- CNC controls SIEMENS 840 C
- Year of construction
- 1996
- Last revision
- 2011
- basic design
- portal type
- x-axis traverse
- 14000
- mm
- y-axis traverse
- 5000
- mm
- z-axis traverse
- 1500
- mm
- w-axis traverse
- 3000
- mm
- Passage height
- 4500
- mm
- distance between columns
- 4000
- mm
- clamping surface (left-right)
- 9000
- mm
- clamping surface (front-back)
- 3000
- mm
- workpiece load (max)
- 100000
- kg
- spindle type
- vertical
- spindle revolutions (min)
- 2
- /min
- spindle revolutions (max)
- 2500
- /min
- number of gears
- 2
- spindle diameter
- 200
- mm
- taper fixture
- ISO SK 50
- drive power (max)
- 113
- kW
- spindle power (continuous)
- 106
- kW
- torque (max.)
- 9500
- Nm
- traverse velocity x (min)
- 1
- mm/min
- traverse velocity x (max)
- 10000
- mm/min
- traverse velocity y (min)
- 1
- mm/min
- traverse velocity y (max)
- 10000
- mm/min
- traverse velocity z (min)
- 1
- mm/min
- traverse velocity z (max)
- 10000
- mm/min
- feed velocity w (min)
- 1
- mm/min
- feed velocity w (max)
- 2000
- mm/min
- rapid traverse x
- 20000
- mm/min
- rapid traverse y
- 20000
- mm/min
- rapid traverse z
- 20000
- mm/min
- rapid traverse w
- 2000
- mm/min
- mains voltage
- 400
- V
- mains frequency
- 50
- Hz
- height above floor level
- 8590
- mm
- total weight approx.
- 360000
- kg
- angular milling head
- yes
- autom. tool clamping
- yes
- ball spindles
- yes
- guideway covers
- yes
- coolant unit
- yes
- high pressure cooling syst. (through spindle)
- yes
- closed cabin
- yes
- chip conveyor
- yes
Planer Type Milling Machine - Universal
basic design
Working Range -milling-
Portal / Bridge
Table
working spindle / head
Axis drives
Electrical specifications
Dimensions / weights
attachments
Description of condition
In 2011/2012 these 2 identical machines were retrofitted and rebuilt by WALDRICH COBURG.
The milling length was extended to 14meters and an automatic changing system for table pallets was installed.
Both machines can be seen under power by prior appointment.
VIDEO: youtu.be/1QQV0A5vzf0
The milling length was extended to 14meters and an automatic changing system for table pallets was installed.
Both machines can be seen under power by prior appointment.
VIDEO: youtu.be/1QQV0A5vzf0
Technical description
PLANER TYPE MACHINING CENTER – EACH WITH 3 PALLETS 9000 x 3000 mm:
- Tool changer with 420 tools
- Head pick-up system
- Video monitoring via camera
- High pressure lubrication unit for inner cooling 70bar
AVAILABLE HEAD UNITS:
- Fixed angle head HS800C600 105 Kw 600 long
- Fixed angle head HSD350C850 50 Kw 850 long
- Fixed angle head HSD 40C880 12 Kw 880 long
- Fixed angle head HSD 190C1000 30 Kw 1000 long
- Vertical spindle unit VS800C 105 Kw 900 long
- Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time
- Angle spindle unit SO800C905 - 22,5° fix
- Angle spindle unit HSE1200CS -25° fix
- Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth
One additional drilling extension SE 350C plus 1 SE500C.
- Tool changer with 420 tools
- Head pick-up system
- Video monitoring via camera
- High pressure lubrication unit for inner cooling 70bar
AVAILABLE HEAD UNITS:
- Fixed angle head HS800C600 105 Kw 600 long
- Fixed angle head HSD350C850 50 Kw 850 long
- Fixed angle head HSD 40C880 12 Kw 880 long
- Fixed angle head HSD 190C1000 30 Kw 1000 long
- Vertical spindle unit VS800C 105 Kw 900 long
- Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time
- Angle spindle unit SO800C905 - 22,5° fix
- Angle spindle unit HSE1200CS -25° fix
- Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth
One additional drilling extension SE 350C plus 1 SE500C.
Technical data sheet