Transfer Press -mechanical-
NEW ADDITION
New
- Stock number
- 7-47217
- Make
- FAGOR
- Model
- TSE2-1000-4000-1600
- Control
- PLC SIEMENS S7-1500F
- frame design
- Transfer press
- Drive type
- mechnical
- openings in uprights
- yes
- opening in table
- yes
- moving bolster
- yes
- number of tables
- 2
- total force (nominal)
- 1000
- to
- clamping surface (left-right)
- 4000
- mm
- clamping surface (front-back)
- 1600
- mm
- height above floor level
- 600
- mm
- autom. tool clamping device
- yes
- stroke
- 400
- mm
- ram adjustment
- 300
- mm
- ram adjustment
- 100
- mm
- number of strokes min
- 8
- /min
- number of strokes max
- 50
- /min
- hydraulic overload protection
- yes
- shut height (stroke down, adjustment up)
- 900
- mm
- shut height (stroke down, adjustment up)
- 766
- mm
- distance between columns (H-frame)
- 4250
- mm
- Free passage between side columns (width)
- 1800
- mm
- tool weight max.
- 20000
- kg
- Inner width clamping rails closed max.
- 500
- mm
- Inner width clamping rails open max.
- 1300
- mm
- distance between tools, stroke from
- 0
- mm
- distance between tools, stroke to
- 800
- mm
- total power consumption
- 200
- kW
- mains power supply
- 350
- kVA
- mains voltage
- 400
- V
- mains frequency
- 60
- Hz
- space requirements length
- 7500
- mm
- space requirements width
- 4800
- mm
- height above floor level
- 7360
- mm
- height under floor level
- 4000
- mm
- total weight approx.
- 250000
- kg
- light barrier
- yes
- cutting impact damping system
- yes
- autom. tool clamping device
- yes
- hydraulic overload protection
- yes
- transfer system
- yes
Transfer Press -mechanical-
Press Design
Press forces
Press Table
Ram
ram (mechan. press)
Tool Assembly Dimensions
Transfer System
Electrical specifications
Dimensions / weights
Attachments for Presses
Description of condition
New transfer press! Stored. Never assembled.
Complete with electronic beam transfer system, 0-800 mm transfer step and 500-1300 mm distance between transfer beams. Lifting stroke = 0-150 mm.
2 units moving bolster , T-shaped-front travel.
Maximum total tool weight: 20,000 kg, upper section: 10,000 kg.
The different specifications for the installation height result from the installation or removal of the table and ram plates. The different specifications for the ram adjustment refer to operation with or without the transfer device.
Ram weight compensation via pneumatic cylinders. Automatic pressure setting with setpoint from the tool memory.
Lubrication: Main bearings and gears are continuously lubricated by a circulating lubrication system.
LED tool room lighting. 2 auxiliary control panels, scrap deflectors, press force measuring device, KTI vibration dampers.
Complete with electronic beam transfer system, 0-800 mm transfer step and 500-1300 mm distance between transfer beams. Lifting stroke = 0-150 mm.
2 units moving bolster , T-shaped-front travel.
Maximum total tool weight: 20,000 kg, upper section: 10,000 kg.
The different specifications for the installation height result from the installation or removal of the table and ram plates. The different specifications for the ram adjustment refer to operation with or without the transfer device.
Ram weight compensation via pneumatic cylinders. Automatic pressure setting with setpoint from the tool memory.
Lubrication: Main bearings and gears are continuously lubricated by a circulating lubrication system.
LED tool room lighting. 2 auxiliary control panels, scrap deflectors, press force measuring device, KTI vibration dampers.
Technical data sheet